Research Compound Reference
FOXO4-DRI
FOXO4-DRI is supplied by Amino Fuel Labs as lyophilized powder (10mg) and is classified in catalog records as Senolytic Research Peptide. This reference page collects the molecular identifiers, analytical documentation, and laboratory handling context recorded for the material. For laboratory research use only.
Verified record fields
| Canonical name | FOXO4-DRI |
|---|---|
| Compound class | Senolytic Research Peptide |
| Molecular formula | C₂₃₂H₃₇₉N₇₃O₇₀S |
| Molecular weight | 5265.0 g/mol (approx.) |
| Sequence | D-retro-inverso FOXO4 p53-interacting domain peptide (all-D amino acids) |
| Physical form | Lyophilized Powder (10mg) |
| Recorded storage condition | -20°C (long-term); refrigerate after reconstitution; protect from light |
| Documented lot | AFL-FOX04-10-2026-801 |
| Lot purity (HPLC) | 99.24% — view lot documentation |
| CAS number | Not provided |
What is FOXO4-DRI?
FOXO4-DRI is a research material listed in the Amino Fuel Labs catalog under the Longevity research area and classified as Senolytic Research Peptide. It is supplied in dried form for laboratory work and is not a finished pharmaceutical product.
This page describes only what Amino Fuel Labs records establish about the material: its recorded identifiers, the analytical documentation issued for its lot, and general laboratory handling considerations. It does not describe use in people or animals and contains no dosing information.
Structure and classification
FOXO4-DRI is classified as a peptide research material. Records list the molecular formula C₂₃₂H₃₇₉N₇₃O₇₀S and a molecular weight of 5265.0 g/mol (approx.).
The sequence recorded for this material is D-retro-inverso FOXO4 p53-interacting domain peptide (all-D amino acids). Sequence information is what allows a calculated mass to be compared against an observed mass during identity confirmation.
No CAS registry number is recorded in Amino Fuel Labs documentation for this item, so that field is left as not provided.
Published research context
Amino Fuel Labs does not hold verified primary references for this specific catalog item, so no citation list is presented rather than linking sources that may describe a different compound.
Where published work exists for a material of this classification, evidence levels vary and preliminary findings are not evidence of an effect in people.
Analytical characterization
Documentation issued for lot AFL-FOX04-10-2026-801 reports a chromatographic purity of 99.24%. That figure describes the tested lot under the stated method and does not extend to any other lot.
Identity and purity are separate analytical questions. Chromatographic separation reports relative composition among detected peaks, while mass measurement supports the identity assignment. Neither method establishes sterility, endotoxin status, or fitness for any application.
Laboratory handling and storage considerations
The storage condition recorded for this material is: -20°C (long-term); refrigerate after reconstitution; protect from light. Conditions stated on a specific lot's documentation take precedence over general guidance.
Dried material is hygroscopic. Allowing a cold vial to reach ambient temperature before the closure is broken limits condensation onto the cake, and limiting light exposure and headspace time reduces avoidable degradation. These are laboratory handling considerations only and are not preparation instructions.
Frequently asked questions
- What type of research material is FOXO4-DRI?
- Catalog records classify it as Senolytic Research Peptide within the Longevity research area, supplied as lyophilized powder (10mg).
- Is FOXO4-DRI a peptide or a small molecule?
- It is classified as a peptide research material, and an amino-acid sequence is recorded for it.
- What molecular identifiers are verified for FOXO4-DRI?
- Records list molecular formula C₂₃₂H₃₇₉N₇₃O₇₀S, molecular weight 5265.0 g/mol (approx.), a recorded amino-acid sequence. No CAS number is recorded, so that field is shown as not provided.
- How is identity or purity evaluated analytically?
- Purity is evaluated by chromatographic separation reported as area percent under a stated method, and identity is supported by mass measurement compared against the calculated mass. Both results apply to the tested lot only.
- How should unopened lyophilized material be stored in a laboratory?
- The condition recorded for this material is: -20°C (long-term); refrigerate after reconstitution; protect from light. The lot's own documentation governs where it differs.
- Is a lot-specific Certificate of Analysis available?
- Yes. Documentation for lot AFL-FOX04-10-2026-801 is linked from the verified-facts table above and from the Lab Reports section.
- Is this material approved for any use beyond laboratory research?
- No. It is supplied strictly as laboratory research material. It is not approved, not intended to diagnose, treat, cure, or prevent disease, and not for consumption of any kind.
Related references
- Lab GuidesHow to Read a Certificate of Analysis
- Lab GuidesHPLC and Mass Spectrometry in Peptide Identity and Purity Testing
- Lab GuidesLyophilized Peptide Storage and Stability
- Lab GuidesBacteriostatic Water vs Sterile Water in Laboratory Workflows
- Lab GuidesLot Numbers, COA Matching, and Chain of Custody
- Lab GuidesUnderstanding Peptide Purity vs Net Peptide Content
Research material availability
When reviewing material for a defined study, compare the recorded identity, lot, specifications and documentation with the current FOXO4-DRI research product page. Catalog listings are for laboratory research only.
Research use only. The information in this library is educational and is not medical advice. Products are not intended to diagnose, treat, cure, or prevent disease.